https://gitlab.synchro.net/main/sbbs/-/issues/468#note_2959
Are you using the receive data rate option (-r on the command-line, or "Rate" in
the svdm.ini file) or the -R command-line option?It appears you are running with
the debug (-d) option, so I would expect the "rx_delay" setting value to be
output to the debug log when SVDM terminates. Normally, this value would be 0.I
just committed a change that adds the clock values to several of the debug
messages that will help me to eliminate the rx_delay setting/checking as the
root cause of the issue (or not). Please run again with a build using that
commit, or later.This smells like an issue sending or receiving over the socket,
but I can't tell if that 2-byte TX's are actually getting through to the
receiving app or not. A TCP packet dump (e.g. using Wireshark) could be helpful
to understand whether this is a transmit or a receive problem.
--- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
|
