Re: USR USB Modem woes
By: Ted Long to deon on Sun Jan 29 2023 11:35 am
> Thanks for the response
>
> Hotplug is detecting the modem....(cutcutpaste...)
>
> Bus 001 Device 006: ID 04c1:3021 U.S. Robotics (3Com) 56k Voice FaxModem Pro
>
> And the kernel is assigning it to abstract (virtual) port /dev/ACM0....the
> modem apparently is seeing activity on the port, because when I plug in the
> USB cable, the data and CTS/RTS LEDs flash for a second. But there's no
> response to an AT command when sent from Minicom. I'm about ready to break
> out the 'scope or a logic probe to see if any data is actually being sent to
> the modem.
OK, what device is the comms program using to talk to a "modem"?
If you use minicom, you should be able to connect to port /dev/ACM0 and talk to
it - get the baud right because the modem will be talking a default baud rate -
probably 19,200 or 38,400, and if they dont work 115k might. You'll know your cl
ose, because you'll see gibberish at the wrong baud speed.
...δεσ∩
---
■ Synchronet ■ AnsiTEX bringing back videotex but with ANSI
|
